Relined Hot Water Storage Tank

Hot Water Storage Tank - Reline

 

This image represents how the inside of your large Domestic Hot Water Storage Tank should look.  This tank was freshly relined with Pre-Krete T61.  Pre-Krete T61 is a CSA/NSF approved product for use in potable water and is the best product for the inside of a DHWST.  The Pre-Krete T61 lining will last 12-15 years before the tank should be relined.

Also note the new anodes.  While Pre-Krete T61 protects the tank from corrosion, the anodes sacrifice themselves to protect all the unlined areas such as the inlets and outlets.  Anodes should be replace every 1-3 years depending on water quality.  Note:  If your tank is going to leak, it's more than likely going to be around the inlets or outlets.  Anode replacement is vital!

So, by relining your tank every 12-15 years and replacing your anodes every 1-3 years, your tank could outlast the building.

Remember, just one emergency situation will cost you more than 15 years of proper preventative maintenance!

Jason Rusnak

Director of Business Development
Provincial Tank Lining and Inspections Inc.
C 519.387.2635
www.ProvTank.com

Provincial Tank Lining and Inspections Inc. Services Canada with Offices in Vancouver, British Columbia and Owen Sound, Ontario.